Adsorption removal of pollutants by active cokes produced from sludge in the energy recycle process of wastes

This study proposes a recycling system of sludge into active cokes and the fundamental examinations for the application were carried out. In the system, active cokes were produced by carbonizing pellets of sludge in a steam stream. Pyrolysis gas yielded by carbonization can be available to a fuel for a steam generation boiler. The exhaust heat from the boiler is used sequentially for drying of sludge. The active cokes are applied to the adsorbent for dioxin removal in exhaust gas from incinerators of wastes, or for purification of gas obtained in a gasification process of wastes, particularly removal of H2S. The used adsorbent is not recycled, but incinerated in the furnace without a desorption process to decompose adsorbed dioxin or to oxidize H2S for a sequential desulfurization process of SO2. Dry pellets of sludge were carbonized in a quartz tube reactor under various atmospheres. The micro pore structure and the adsorption performance of the cokes produced without activation process were examined. The micro pore structure was influenced by the temperature, the sort of flow gas (N2, CO2 and steam) and carbonization time, and the active cokes produced under the condition of the temperature 823 K for 60 min in the steam atmosphere had a largest specific surface area in the diameter less than 5 nm. The amount of benzene adsorption as an alternative substance of dioxin into the active cokes had a similar quality to a commercial active char produced from coal if it was evaluated by adsorption per a unit specific surface area. This fundamental knowledge must be reflected to an optimum design for development of a simple continuous process to produce the active cokes by a fluidized bed type of the carbonization furnace.     

Spatial characteristics of turbulent organized structures within the roughness sublayer over idealized urban surface with obstacle-height variability

Environmental Fluid Mechanics - The effects of obstacle-height variability on spatial characteristics of turbulent organized structures were investigated with the use of a large-eddy simulation...     

Coherent array of branched filamentary scales along the wing margin of a small moth

In butterflies and moths, the wing margins are fringed with specialized scales that are typically longer than common scales. In the hindwings of some small moths, the posterior margins are fringed with particularly long filamentary scales. Despite the small size of these moth wings, these scales are much longer than those of large moths and butterflies. In the current study, photography of the tethered flight of a small moth, Phthorimaea operculella, revealed a wide array composed of a large number of long filamentary scales. This array did not become disheveled in flight, maintaining a coherent sheet-like structure during wingbeat. Examination of the morphology of individual scales revealed that each filamentary scale consists of a proximal stalk and distal branches. Moreover, not only long scales but also shorter scales of various lengths were found to coexist in each small section of the wing margin. Scale branches were ubiquitously and densely distributed within the scale array to form a mesh-like architecture similar to a nonwoven fabric. We propose that possible mechanical interactions among branched filamentary scales, mediated by these branches, may contribute to maintaining a coherent sheet-like structure of the scale array during wingbeat.     

PCDDs/PCDFs and PCBs in water samples from the Three Gorge Reservoir

The Three Gorge Reservoir (TGR) is the largest reservoir in China and its water quality is an important health concern, we have determined the concentrations of PCDDs/PCDFs and PCBs in the water samples collected at three seasons: August 2004, January 2005 and August 2005. The results showed that the average WHO-TEQ of total dioxins-like compounds (PCDDs/PCDFs+PCBs) was 0.06558 pg l(-1), ranged from 0.0008 to 0.32439 pg l(-1), which are much lower than other reported water sources. The main dioxins (PCDDs/PCDFs) are hepta- and octa-chlorinated dibenzo-p-dioxins (CDDs) and chlorinated dibenzofurans (CDFs). Since the levels of dioxins may change after the last water-store stage, the present study provides important data to compare the water quality in the TGR in the future.     

Characteristics of applicator exposure to synthetic pyrethroid in ULV-handheld and ULV-ULA spray applications

The technique of ultra-low volume by ultra-light aircraft for pesticide spray application has been discussed for some time in North America, mainly due to the air worthiness of such an aircraft which was not designed to carry appreciable amounts of payload. The risk factor of such application in insect control has not been determined, while applicator exposure to insecticide in ULV application by manual sprayer was assessed. An attempt was made to produce, by a series of field exposure measurements, a set of applicator exposure data for ULV-ULA and to compare the results with the data produced in synthetic pyrethroid application by using a hand-held ULV applicator. The applicator exposure of hand-held operation resulted in as high as 1000 times the exposure of aerial applicators indicating the effect of work practices and man-machine relationships. A delineation of toxic dose for these two types of applications shows that the aerial application could provide some benefits in reducing applicator exposure potential.     

Effect of feedlot design and management on the fate and distribution of monensin

Feedlots produce a range of trace chemicals that impact human health and/or the environment. The most widely used growth promoter in intensive cattle production in Argentina is monensin, an ionophore polyether with antibacterial and coccidiostatic activity. Several beef cattle feedlots with different management systems, weather conditions, feed types and feedbunk types were selected in different agro-ecological areas of Argentina. Monensin concentrations in samples of pen soil, manure, feed and runoff were analysed. The monensin concentrations measured in soil samples suggest a strong dependence on the type of feed employed in the facility. During feed distribution by trucks to the feedbunks, some feed can reach the soil, thereby increasing the soil monensin concentration close to the feedbunks. The wide range of monensin concentrations detected in manure samples could be explained by the rapid degradation of monensin in the manure matrix. Monensin levels in runoff samples indicated that the distribution of monensin in the environment could be governed by surface phenomena including horizontal movement and adsorption of monensin in particulate material present in the runoff layers. This is the first study of monensin distribution in Argentinian feedlots and serves as the starting point for more sustainable and environmentally friendly feedlot management.     

Geographical genetic structure and phylogeography of the <Emphasis Type="Italic">Sargassum horneri</Emphasis>/<Emphasis Type="Italic">filicinum</Emphasis> complex in Japan,based on the mitochondrial <Emphasis Type="Italic">cox3</Emphasis> haplotype

The genetic structure and phylogeography of the brown seaweed Sargassum horneri/filicinum complex in Japan were studied based on the mitochondrial cox3 haplotype. The cox3 haplotypes found were divided into three clades in a statistical parsimony network, among which there were large numbers of steps. Contrary to the reported large amount of drifting S. horneri along the Japanese coast, the three clades were dividedly distributed on the Japanese coast: the northern Pacific, the central Pacific, and western Japan. The western Japan S. horneri had haplotypes that were phylogenetically closer to those of S. filicinum than to the northern and central Pacific S. horneri populations. The S. filicinum populations were included within the western Japan clade and grouped together with the S. horneri samples from western Japan. Taken together with the unstable morphological diagnosis, this result suggests that S. filicinum should be reduced into a synonymy of S. horneri. The TMRCA analysis suggested that the divergence time of each clade may go back to the last interglacial period and a skyline plot suggested that the last glacial maximum had only a small effect on the population size of S. horneri. The geographic subdivision of the three groups, in spite of a large amount of drifting mats, suggests a limited contribution of drifting mats to gene flow on a large geographic scale. On a small geographic scale, a small number of haplotypes were shared between S. horneri-type and S. filicinum-type populations. This result suggests that populations of these two types are partially, though not completely, isolated from each other, possibly by selfing in S. filicinum-type populations or by a difference in peak reproduction.     

An international comparative study of end-of-life vehicle (ELV) recycling systems

End-of-life vehicles (ELV) have become a global concern as automobiles have become popular worldwide. An international workshop was held to gather data and to discuss 3R policies and ELV recycling systems, their background and present situation, outcomes of related policies and programs, the framework of recycling and waste management, and case studies on related topics in several countries and regions, as well as the essential points of the comparison. Legislative ELV recycling systems are established in the EU, Japan, Korea, and China, while in the US, ELV recycling is managed under existing laws on environmental protection. Since automobile shredding residue (ASR) has a high calorific value and ash content, and includes heavy metals as well as a mass of unclassified fine particles, recycling ASR is considered highly difficult. Countries with a legislative ELV system commonly set a target for recovery rates, with many aiming for more than 95 % recovery. In order to reach this target, higher efficiency in ASR recovery is needed, in addition to material recycling of collectable components and metals. Environmentally friendly design was considered necessary at the planning and manufacturing stages, and the development of recycling systems and techniques in line with these changes are required for sound ELV management.     

Some properties of trypsin-like proteases extracted from the seaweedCodium fragile and their purification

Two enzymes were purified from the green algaCodium fragile, collected in 1988 at Fukuoka, Japan, by batch-wise ion-exchange extraction, affinity chromatography and ion-exchange high-performance liquid chromatography (HPLC) using Boc-Ala-Ala-Pro-Arg-pNA as a substrate. The molecular weights of the enzymes were estimated as 38 000 and 39 000, using gel filtration HPLC. The enzymes had the same optimal pH range of 7 to 9 for both activities, and an exclusively hydrolyzed peptide bond on the carboxyl-terminal side of theL-arginine of peptidep-nitroanilides. The ratios of the enzymatic activity for X-Arg-pNA to X-Lys-pNA were larger than 100. The enzymes exhibited 30 times higher activity toward Boc-Ala-Ala-Pro-Arg-pNA when compared with trypsin. The activities were strongly inhibited by diisopropyl phosphofluoridate (DFP), and partially inhibited by phenylmethylsulfonyl fluoride (PMSF), benzamidine, leupeptin and antipain. The isolated enzymes were presumed to be trypsin-like serine protease from their primary substrate specificities and inactivation behavior.